Weather:  sunny, no cloud

 

To-do list:

• Refill li7700 water reservoir

50%left

• Clean sensors (glassex)

done

• Check if li7700 can get rssi higher than 76% (scratches)

Higher than 76%, no scratches anymore

• Download met data

done

• Download flux data

Done

We need to pull out the USB to download flux data, 4.4GB free left

• Check clocks

Datalogger 2s ahead PC, gases 2s behind PC. CO2 the same as CH4

• Replace li7700 cap

done

• Download SD card Phenocam photos

Done

 

In PC400, we change the save pathway to Riet Vell, but when we download it still show Alfacada pathway. – fixed after the internet was connected.

 

Veg height: 31cm, 9.8cm, 12.1cm, 17.1cm, 21.6cm, 23.4cm

Water height: no water, very dry soil

 

Readings:

	Before cleaning sensors	After cleaning sensors
LI-7500 readings
CO2 ppm	410	409.87
H20 ppm	10.41	12.16
T ºC	15.19	15.43
P kPa	102.5	102.48
SS %	98.6	99.27
LI-7700 readings
CH4 ppm	2.11	2.12
RSSI %	59	77.96